how to install projector ceiling mount

 

If you have a projector at work, or are just looking for an alternative to mounting your projector on the ceiling, you'll need a ceiling mount. There are many different types of mounts, but these are the six most common.".

You might want to use a ceiling mount if your projector has some weight and is difficult to lift and screw into place - installing it using this method takes just 20 minutes! It also won't get in your way as much when you're moving around the room for presentations and meetings.

If you're ready to break out of your expensive-projector-on-the-ceiling rut, read more about how you can install one here.

 

Image source: https://www.amazon.com/

An adjustable mount is good for smaller rooms and works well if you have a projector that's a few years old. Instead of the heavy equipment to fix it permanently to your ceiling, all you need is an adjustable bracket and a few screws. This works with most ceilings at least 12 feet high and can be expanded or adjusted according to your preferences.

This mount works better if you have an older projector or one that is quite heavy - it will hold up to 100 pounds! It comes with the hardware needed for installation and normally takes about 20 minutes using standard tools. This is a great option for heavy projectors that won't fit on smaller mounts.

An articulating arm is a great choice if you want to project on a wall or ceiling that doesn't have the same clearance as your desk or table. You can adjust the projector to fit any angle with this mount, using two levers and positioning the arm. This way, you don't need to reposition your computer every time you need to use it.

 

Image source: https://www.ebay.com/

Because this mount works on a ball joint and tilts from side-to-side, it's perfect for rooms where there isn't enough space for full rotation or for shabby installations that would involve drilling holes into your walls. It takes about 15 minutes to install, uses standard tools and comes with the hardware needed for installation.

This is a beefed-up, heavy-duty mount for use with large projectors. It's an excellent option if you want to mount your projector in your conference room or auditorium and need a sturdy, long-lasting mount. This has a 200 pound weight limit and comes with the hardware needed for installation.

 

If you're looking for something lightweight to mount your projector in a small room or even on top of a shelf, this could be the right one for you. This ceiling bracket is made of flexible steel (25mm) and comes with cables that can support up to 20 pounds! It takes just 10 minutes to install this on your ceiling.

This mount is easy to use, unlike many ceiling mounts, and has a flexible design that is almost fail-proof. You can install the mount onto any ceiling between 3 and 10 feet - this will work for most office ceilings but you'll want to double-check before buying. This takes 10 minutes to install and comes with all of the hardware needed.

Projector mounts are an affordable and quick way to get your projectors set up - they're perfect for meeting rooms and classrooms where you need a lot of flexibility in installation. You can buy one here or start shopping around for your mounts at eBay.com! They have great deals on all sorts of equipment and will ship it right to your door.